Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
-
“Z” swivel-1/2″ -27 x 1/4″ NPT
$82.61#81387View Product“Z” swivel-1/2″ -27 x 1/4″ NPT
#81387Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
View all product informationProduct details
- 1/2”-27 male x ¼” NPT Male threads
- 7500 psi maximum working pressure
- Works with Lincoln 740 Grease Gun
$82.61
Quick View -
“Z” swivel-1/2″ NPT x 3/8″ NPT
$167.26#81729View Product
“Z” swivel-1/2″ NPT x 3/8″ NPT
#81729Lincoln High volume, universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
View all product informationProduct details
- ½” NPT male x 3/8” NPT Male threads
- 7500 psi working pressure
- Works with Lincoln 3050 Grease Gun
$167.26
Quick View -
007 Tank Alarm package
$655.49#7575View Product007 Tank Alarm package
#7575BJE 007 High/Low tank alarm for use with oils and waste oil, diesel fuel, anti-freeze, water, and other high flash point fluids. Avoid costly overflows or untimely shortages.
View all product informationProduct details
- Supervised system, includes tank probe and alarm panel-Solenoid is sold separately (#7580)
- Low voltage
- Strobe and siren
- Can drive up to 10 solenoid valves
- Easy installation
- Maximum milliamp load is 750 mA
$655.49
Quick View -
1″ Quiet Air Intake Muffler
$163.65#6105-QFView Product
1″ Quiet Air Intake Muffler
#6105-QFSaylor/Beall Quiet Intake air inlet filter. Suppresses the noise of your compressor during the intake cycle, without significant decrease in air intake volume. Also doesn’t place additional heat causing stress on your air pump.
View all product informationProduct details
- 1” threads-make sure your air intake port is 1”
$163.65
Quick View -
1/2″ Filter/Regulator/Lubricator Combo
$150.37#1102View Product1/2″ Filter/Regulator/Lubricator Combo
#1102Milton ½” Air Filter/Regulator/Lubricator trio pack. Use for all compressed air drops where ½” is adequate.
View all product informationProduct details
- ½” NPT Female inlet and outlet
- 9 ounce capacity metal filter bowl with auto overnight drain
- 9 ounce lubricator bowl capacity
- 100 SCFM max air flow
- Air gauge included
$150.37
Quick View -
1/4″ Air Filter/Regulator Duo
$49.34#S-1142View Product1/4″ Air Filter/Regulator Duo
#S-1142Milton Mini “Piggy Back” air pressure filter and regulator with gauge.
View all product informationProduct details
- ¼” NPT female air inlet and outlet
- 0-160 psi gauge included
- 20 micron air filter eliminates impurities flowing to air tools
- 20 SCFM max air flow
- 1 ounce bowl capacity with auto overnight drain
- 6.25” total height
$49.34
Quick View -
1/4″ Milton Style Female thread x Female QD Fitting
$3.58#715View Product1/4″ Milton Style Female thread x Female QD Fitting
#715Milton M Style air coupler. ¼” female npt thread with female quick connect.
View all product information$3.58
Quick View -
1/4″ Milton Style Male thread x Female QD Fitting
$3.58#716View Product1/4″ Milton Style Male thread x Female QD Fitting
#716Milton M style air coupler. ¼” npt male thread with female quick connect. Excellent for piped air drops.
View all product information$3.58
Quick View -
1/4″ Milton Style Male thread x Male QD Fitting
$0.83#727View Product1/4″ Milton Style Male thread x Male QD Fitting
#727Milton M style air coupler plug. ¼” npt male thread with M style male plug.
View all product information$0.83
Quick View -
1/8″ Milton Style Female thread x Male QD Fitting
$0.88#729View Product1/8″ Milton Style Female thread x Male QD Fitting
#729Milton M style air coupler plug. 1/8” npt female thread with M style male plug.
View all product information$0.88
Quick View -
10′ x 3/4″ DEF Hose
$52.03#343123-3View Product10′ x 3/4″ DEF Hose
#343123-3Alemite DEF specific hose.
View all product informationProduct details
- ¾” x 10’
- Wetted tube is Sulfur free EPDM rubber
- Outer reinforced synthetic fiber with EPDM cover
$52.03
Quick View -
10:1 high pressure universal oil pump
$1,721.06#V410000000View Product
10:1 high pressure universal oil pump
#V410000000Lincoln Pneumatic PMV 10:1 ratio Light Lubricant Pump.
View all product informationProduct details
- Suitable for most light lubricants, including motor oil, atf, gear lube, hydraulic fluid. 4.25” air motor provides the higher volume and pressure needed for heavy commercial use, long piping runs, and high volume dispense
- Universal Length-just add an appropriately sized 1.5” suction tube to accommodate your tank length
- 3/8” air inlet, ½” material outlet. 1500 psi max fluid outlet pressure
- Will feed a shop with a large number of dispense points (2 dispense points simultaneously)
$1,721.06
Quick View -
10:1 Oil Pump package for use on Lube Truck-Closed Head Drum Mount
$2,121.08#V410055LBView Product10:1 Oil Pump package for use on Lube Truck-Closed Head Drum Mount
#V410055LBLincoln Pneumatic PMV 10:1 ratio Light Lubricant pump package for use on a lube truck. This package includes everything needed to securely mount bung mount pump and 55-gallon drum to the floor of your lube truck or mobile maintenance truck. Additionally, the higher ratio, and thus higher pressure, of the 10:1 pump makes it suitable for use in cold climates, when the fluid that you’re pumping gets thick.
View all product informationProduct details
- Includes pump, drum tie down kit, bung adapter, 55-gallon length suction tube, air hose and coupler
- For mounting in 2” bung of a closed head drum
$2,121.08
Quick View -
10:1 Oil Pump package for use on Lube Truck-Open Head Drum Mount
$2,685.54#V410055LTView Product10:1 Oil Pump package for use on Lube Truck-Open Head Drum Mount
#V410055LTLincoln Pneumatic PMV 10:1 ratio Light Lubricant pump package for use on a lube truck. This package includes everything needed to securely mount pump and 55-gallon open head drum to the floor of your lube truck or mobile maintenance truck. Additionally, the higher ratio, and thus higher pressure, of the 10:1 pump makes it suitable for use in cold climates, when the fluid that you’re pumping gets thick.
View all product informationProduct details
- Includes pump, drum cover with special mounting lugs, drum tie down kit, 55-gallon length suction tube, air hose and fitting kit
$2,685.54
Quick View -
10:1 Oil Pump Package for wall mount use
$2,696.10#V41000SWMView Product10:1 Oil Pump Package for wall mount use
#V41000SWMLincoln Pneumatic PMV 10:1 ratio Light Lubricant wall mount Pump Package. Intended use is to draw from drums, or low-profile tanks, in a tank room. The wall mount configuration makes drum changes quick, easy, and neat. Instead of removing the entire pump from the drum, and then finding a clean area to set the pump while the drum is being changed, you simply remove the suction tube and replace the drum, then insert the suction tube in the new drum.
View all product informationProduct details
- Includes pump, wall mount bracket, suction kit, air and fluid hose and fitting kit
$2,696.10
Quick View -
10:1 Oil Pump Package-universal length
$2,257.42#V41000SSUView Product10:1 Oil Pump Package-universal length
#V41000SSULincoln Pneumatic PMV 10:1 ratio Light Lubricant Universal bung mount Pump Package.
View all product informationProduct details
- Universal configuration allows pump to be used on any sized fluid container. Just supply the appropriately sized 1.5” suction tube
- Includes pump, bung adapter (for mount in 2” bung), air and fluid hose and fitting kit
$2,257.42
Quick View -
10:1 Ram Stub Pump
$947.60#9970View Product
10:1 Ram Stub Pump
#9970Alemite 10:1 Ratio Pneumatic Ram Oil Pump. Universal or Stub length, so it can be used in any sized container. If suction tube will be longer than 60” use 321206 low level cut off/check valve to avoid loss of prime. The 10:1 ratio provides double the fluid pressure of the 5:1 ratio pumps, but half the volume at the same pump speed, so it will push light lubricants up to 300’ with through 1” I.D. pipe or tubing. Call us for proper application.
View all product informationProduct details
- Universal or Stub Length-Attach the suction tube of your choice
- 3/8” Material outlet, ¼” air inlet
- 3” Air Motor, 10:1 Ratio
- 1500 psi maximum fluid outlet pressure
- 3.5 gallons per minute, maximum free flow
- Includes 326750-E1 Bung Adapter
- 14 lbs
$947.60
Quick View -
10:1 Ram Stub Pump
$947.60#9970View Product10:1 Ram Stub Pump
#997010:1 stationary RAM stub pump includes bung adapter, 3.5 gal deliv
View all product informationProduct details
- Universal or Stub Length-Attach the suction tube of your choice
- 3/8” Material outlet, ¼” air inlet
- 3” Air Motor, 10:1 Ratio
- 1500 psi maximum fluid outlet pressure
- 3.5 gallons per minute, maximum free flow
- Includes 326750-E1 Bung Adapter
- 14 lbs
$947.60
Quick View
