Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
-
“Z” swivel-1/2″ -27 x 1/4″ NPT
$86.60#81387View Product“Z” swivel-1/2″ -27 x 1/4″ NPT
#81387Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
View all product informationProduct details
- 1/2”-27 male x ¼” NPT Male threads
- 7500 psi maximum working pressure
- Works with Lincoln 740 Grease Gun
$86.60
Quick View -
“Z” swivel-1/2″ NPT x 3/8″ NPT
$167.26#81729View Product
“Z” swivel-1/2″ NPT x 3/8″ NPT
#81729Lincoln High volume, universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
View all product informationProduct details
- ½” NPT male x 3/8” NPT Male threads
- 7500 psi working pressure
- Works with Lincoln 3050 Grease Gun
$167.26
Quick View -
10′ x 3/4″ DEF Hose
$77.10#343123-3View Product10′ x 3/4″ DEF Hose
#343123-3Alemite DEF specific hose.
View all product informationProduct details
- ¾” x 10’
- Wetted tube is Sulfur free EPDM rubber
- Outer reinforced synthetic fiber with EPDM cover
$77.10
Quick View -
10:1 Ram Stub Pump
$1,332.95#9970View Product
10:1 Ram Stub Pump
#9970Alemite 10:1 Ratio Pneumatic Ram Oil Pump. Universal or Stub length, so it can be used in any sized container. If suction tube will be longer than 60” use 321206 low level cut off/check valve to avoid loss of prime. The 10:1 ratio provides double the fluid pressure of the 5:1 ratio pumps, but half the volume at the same pump speed, so it will push light lubricants up to 300’ with through 1” I.D. pipe or tubing. Call us for proper application.
View all product informationProduct details
- Universal or Stub Length-Attach the suction tube of your choice
- 3/8” Material outlet, ¼” air inlet
- 3” Air Motor, 10:1 Ratio
- 1500 psi maximum fluid outlet pressure
- 3.5 gallons per minute, maximum free flow
- Includes 326750-E1 Bung Adapter
- 14 lbs
$1,332.95
Quick View -
12 v Rechargeable Power Luber battery
$70.40#1201View Product12 v Rechargeable Power Luber battery
#1201Lincoln Power Luber replacement battery for 12-volt, series 1240 Ni-Cad powered Power Luber grease guns.
View all product information$70.40
Quick View -
12 VDC Battery Charger for 12 Volt Power Luber Batteries
$59.70#1215View Product12 VDC Battery Charger for 12 Volt Power Luber Batteries
#1215Lincoln one hour fast charger for use in vehicles and heavy equipment. Use with 12 Volt Ni-Cad Power Luber batteries (series 1240). Works in 12VDC and 24VDC vehicles. Plugs into vehicle power point (cigarette lighter type port).
View all product information$59.70
Quick View -
12 VDC Power Luber Battery Charger
$52.53#1875AView Product12 VDC Power Luber Battery Charger
#1875ALincoln One Hour battery Charger for use in vehicles and heavy equipment.
View all product informationProduct details
- Works with 12vdc and 24vdc systems. For use with Lincoln 20 volt Lithium-Ion batteries.
$52.53
Quick View -
12/24 VDC Grease gun Battery Charger
$70.35#1855AView Product12/24 VDC Grease gun Battery Charger
#1855ALincoln one-hour fast charger for use in vehicles and heavy duty equipment.
View all product informationProduct details
- Accommodates Lincoln 18-volt Lithium Ion Power Luber Grease Gun Batteries for series 1860 grease guns
- Suitable for use in 12vdc or 24vdc vehicles/heavy equipment
- Plugs into vehicle’s power port
$70.35
Quick View -
12/24 VDC Power Luber Battery Charger 14.4V and 18V battery compatible.
$47.52#1815AView Product12/24 VDC Power Luber Battery Charger 14.4V and 18V battery compatible.
#1815ALincoln one-hour fast charger for use in vehicles and heavy equipment. Works with Power Luber 14.4 Volt and 18 Volt Ni-Cad Batteries. Suitable for use in both 12 VDC and 24 VDC vehicles and equipment. Plugs into the vehicles power port (cigarette lighter type port).
View all product information$47.52
Quick View -
120v Power Luber Grease Gun
$275.40#AC2440View Product
120v Power Luber Grease Gun
#AC2440Lincoln corded AC powered Power Luber grease gun.
View all product informationProduct details
- 120-volt A/C power source required. 6 foot power card is integral to unit
- High Torque AC motor has two speeds and volume outputs
- 7000 maximum working pressure
- 8 ounces per minute volume
- Includes 30” whip hose to service hard to reach grease points
- Excellent and economical alternative to pneumatic guns or pumps
- 3-way fill-cartridge, suction, or pressure
- Includes carrying case
$275.40
Quick View -
12:1 Lincoln PowerMaster III Heavy duty, high pressure oil pump for 55 gallon drum
$3,395.20#2001View Product12:1 Lincoln PowerMaster III Heavy duty, high pressure oil pump for 55 gallon drum
#2001Lincoln’s Famous PowerMaster III 12:1 ratio oil pump for use in 55-gallon drums.
View all product informationProduct details
- Lincoln’s bullet proof PowerMaster III air motor design in 4.25” for high volume, reliable delivery
- 12:1 ratio provides extra pressure for very large shops or multiple simultaneous dispense
- This pump is a beast, and should be order for the busiest, highest volume shops
- 12.3 gpm free flow
- ½” air inlet, ¾” fluid outlet
- Includes 55-gallon drum length pump and air couplers
$3,395.20
Quick View -
12:1 Lincoln Powermaster III High Volume grease transfer pump-universal
$3,071.10#2028View Product12:1 Lincoln Powermaster III High Volume grease transfer pump-universal
#2028View all product informationProduct details
- Lincoln’s bullet proof PowerMaster III air motor design in 4.25” for high volume, reliable delivery
- Priming piston design, and 12:1 ratio works efficiently for extremely high volume grease transfer-12:1 ratio is used for grease transfer, not dispense
- 3.5 gpm maximum free flow of grease, 2400 psi maximum grease outlet pressure
- ½” air inlet, ¾” grease outlet
- Excellent for oil jobbers to transfer bulk grease into salable containers
$3,071.10
Quick View -
16 gallon keg Bearing packer package
$716.40#844View Product16 gallon keg Bearing packer package
#844Lincoln Heavy Duty Bearing Packer package for 120lbs drum (16 gal).
View all product informationProduct details
- Services bearings to 9.5” OD with minimum 9/16” ID
- Included adapter accommodates bearings from 1” to 1-3/4” OD
- Includes pump, drum cover, follower plate, and bearing adapter
- 800 psi max pressure, 1 ounce per stroke
$716.40
Quick View -
1:1 Lincoln Transfer pump with spout and air regulator-55 gallon drum size
$1,126.80#82230View Product1:1 Lincoln Transfer pump with spout and air regulator-55 gallon drum size
#82230Lincoln 1:1 ratio Pneumatic fluid transfer pump for use in 55 gallon drums.
View all product informationProduct details
- Works with all light fluids compatible with carbon steel and Buna wetted parts (call us if you are in doubt)
- High volume, low pressure transfer (up to 20 gpm) directly out of 55 gallon drums
- Includes integral spout that can be connected to fluid hose and built in air control. Also includes bung adapter to mount pump in 2” drum or tank bung
$1,126.80
Quick View -
1:1 Lincoln value series transfer pump for oil
$429.30#4480View Product1:1 Lincoln value series transfer pump for oil
#4480Lincoln low volume, low cost transfer pump for light lubricants.
View all product informationProduct details
- Features Lincoln’s series 4491 3.5:1 ratio, horizontal, valved piston pneumatic pump (6 gpm free flow)
- Includes integral delivery spout and shut off valve
$429.30
Quick View -
1:1 Pump Package
$1,608.55#239-702View Product1:1 Pump Package
#239-702Graco 1:1 ratio “Fast-Ball” oil pump with metered dispense kit and air regulator.
View all product informationProduct details
- Fits in the 2” bung and is sized for a 55-gallon drum
- Includes electronic in-line meter and spring loaded dispense spigot
- Up to 5 gallons per minute if you need it-most users set it at a max of 1 gpm
- ¼” air inlet, ¾” fluid outlet
- Excellent, economical dispense solution for lower use lube products (lube oils, synthetics, atf, hydraulic)
$1,608.55
Quick View -
1:1 Ram Fluid Evac
$930.60#9920View Product
1:1 Ram Fluid Evac
#9920Alemite 9920 Pneumatic fluid evacuation/transfer pump consists of an air-operated motor and a four-ball check valve pump. The four-ball design allows the pump to deliver fluid on both strokes of the piston. This low-pressure pump (1:1 ratio) is designed to transfer all petroleum-based fluids, including waste oil, automatic transmission fluid, diesel fuel, and kerosene at a delivery rate of 20 gallons per minute. The pump is equipped with a bracket for mounting to walls or directly onto bulk tanks. It operates mounted in any direction. The fluid inlet and outlet can be set to either side. This pump features a 1/4″ air inlet, a 1″ NPTF (f) material inlet, and a 1″ NPTF (f) material outlet. It is recommended for piped installations of short to moderate length. The pump assembly weighs 18 lb.
View all product informationProduct details
- 4 ball design for efficient, high volume fluid delivery
- Up to 20 gallons per minute free flow delivery
- 1” fluid outlet, 1/4:” air inlet
- Use for any light lubricant, both fresh and waste
$930.60
Quick View -
1:1 Transfer Pump
$730.70#9916-A1View Product
1:1 Transfer Pump
#9916-A1Alemite 1:1 Ratio Pneumatic Ram Oil Pump. Suitable for high volume, low pressure transfer and dispense of light lubricants. Not recommended for feeding hose reels or oil bars, as maximum fluid pressure is 150 psi.
View all product informationProduct details
- Stub or universal length-Attached your desired length of 1.5” suction pipe
- 1/2” fluid outlet, ¼” Air Inlet
- 3” air motor, 1:1 ratio
- 16 gallons per minute, maximum free flow delivery
- Integral bung adapter
- 17 lbs
$730.70
Quick View
