Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.

Sort by:
  • “Z” swivel-1/2″ -27 x 1/4″ NPT

    $86.60
    #81387
    View Product

    “Z” swivel-1/2″ -27 x 1/4″ NPT

    #81387

    Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.

    Product details

    • 1/2”-27 male x ¼” NPT Male threads
    • 7500 psi maximum working pressure
    • Works with Lincoln 740 Grease Gun
    View all product information

    $86.60

    Quick View
  • “Z” swivel-1/2″ NPT x 3/8″ NPT

    $167.26
    #81729
    View Product

    “Z” swivel-1/2″ NPT x 3/8″ NPT

    #81729

    Lincoln High volume, universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.

    Product details

    • ½” NPT male x 3/8” NPT Male threads
    • 7500 psi working pressure
    • Works with Lincoln 3050 Grease Gun
    View all product information

    $167.26

    Quick View
  • 10′ x 3/4″ DEF Hose

    $77.10
    #343123-3
    View Product

    10′ x 3/4″ DEF Hose

    #343123-3

    Alemite DEF specific hose.

    Product details

    • ¾” x 10’
    • Wetted tube is Sulfur free EPDM rubber
    • Outer reinforced synthetic fiber with EPDM cover
    View all product information

    $77.10

    Quick View
  • 10:1 Ram Stub Pump

    $1,332.95
    #9970
    View Product

    10:1 Ram Stub Pump

    #9970

    Alemite 10:1 Ratio Pneumatic Ram Oil Pump. Universal or Stub length, so it can be used in any sized container. If suction tube will be longer than 60” use 321206 low level cut off/check valve to avoid loss of prime. The 10:1 ratio provides double the fluid pressure of the 5:1 ratio pumps, but half the volume at the same pump speed, so it will push light lubricants up to 300’ with through 1” I.D. pipe or tubing. Call us for proper application.

    Product details

    • Universal or Stub Length-Attach the suction tube of your choice
    • 3/8” Material outlet, ¼” air inlet
    • 3” Air Motor, 10:1 Ratio
    • 1500 psi maximum fluid outlet pressure
    • 3.5 gallons per minute, maximum free flow
    • Includes 326750-E1 Bung Adapter
    • 14 lbs
    View all product information

    $1,332.95

    Quick View
  • 12:1 Lincoln PowerMaster III Heavy duty, high pressure oil pump for 55 gallon drum

    $3,395.20
    #2001
    View Product

    12:1 Lincoln PowerMaster III Heavy duty, high pressure oil pump for 55 gallon drum

    #2001

    Lincoln’s Famous PowerMaster III 12:1 ratio oil pump for use in 55-gallon drums.

    Product details

    • Lincoln’s bullet proof PowerMaster III air motor design in 4.25” for high volume, reliable delivery
    • 12:1 ratio provides extra pressure for very large shops or multiple simultaneous dispense
    • This pump is a beast, and should be order for the busiest, highest volume shops
    • 12.3 gpm free flow
    • ½” air inlet, ¾” fluid outlet
    • Includes 55-gallon drum length pump and air couplers
    View all product information

    $3,395.20

    Quick View
  • Placeholder

    12:1 Lincoln Powermaster III High Volume grease transfer pump-universal

    $3,071.10
    #2028
    View Product

    12:1 Lincoln Powermaster III High Volume grease transfer pump-universal

    #2028

    Product details

    • Lincoln’s bullet proof PowerMaster III air motor design in 4.25” for high volume, reliable delivery
    • Priming piston design, and 12:1 ratio works efficiently for extremely high volume grease transfer-12:1 ratio is used for grease transfer, not dispense
    • 3.5 gpm maximum free flow of grease, 2400 psi maximum grease outlet pressure
    • ½” air inlet, ¾” grease outlet
    • Excellent for oil jobbers to transfer bulk grease into salable containers
    View all product information

    $3,071.10

    Quick View
  • 1:1 Lincoln Transfer pump with spout and air regulator-55 gallon drum size

    $1,126.80
    #82230
    View Product

    1:1 Lincoln Transfer pump with spout and air regulator-55 gallon drum size

    #82230

    Lincoln 1:1 ratio Pneumatic fluid transfer pump for use in 55 gallon drums.

    Product details

    • Works with all light fluids compatible with carbon steel and Buna wetted parts (call us if you are in doubt)
    • High volume, low pressure transfer (up to 20 gpm) directly out of 55 gallon drums
    • Includes integral spout that can be connected to fluid hose and built in air control. Also includes bung adapter to mount pump in 2” drum or tank bung
    View all product information

    $1,126.80

    Quick View
  • 1:1 Lincoln value series transfer pump for oil

    $429.30
    #4480
    View Product

    1:1 Lincoln value series transfer pump for oil

    #4480

    Lincoln low volume, low cost transfer pump for light lubricants.

    Product details

    • Features Lincoln’s series 4491 3.5:1 ratio, horizontal, valved piston pneumatic pump (6 gpm free flow)
    • Includes integral delivery spout and shut off valve
    View all product information

    $429.30

    Quick View
  • 1:1 Pump Package

    $1,608.55
    #239-702
    View Product

    1:1 Pump Package

    #239-702

    Graco 1:1 ratio “Fast-Ball” oil pump with metered dispense kit and air regulator.

    Product details

    • Fits in the 2” bung and is sized for a 55-gallon drum
    • Includes electronic in-line meter and spring loaded dispense spigot
    • Up to 5 gallons per minute if you need it-most users set it at a max of 1 gpm
    • ¼” air inlet, ¾” fluid outlet
    • Excellent, economical dispense solution for lower use lube products (lube oils, synthetics, atf, hydraulic)
    View all product information

    $1,608.55

    Quick View
  • 1:1 Ram Fluid Evac

    $930.60
    #9920
    View Product

    1:1 Ram Fluid Evac

    #9920

    Alemite 9920 Pneumatic fluid evacuation/transfer pump consists of an air-operated motor and a four-ball check valve pump. The four-ball design allows the pump to deliver fluid on both strokes of the piston. This low-pressure pump (1:1 ratio) is designed to transfer all petroleum-based fluids, including waste oil, automatic transmission fluid, diesel fuel, and kerosene at a delivery rate of 20 gallons per minute. The pump is equipped with a bracket for mounting to walls or directly onto bulk tanks. It operates mounted in any direction. The fluid inlet and outlet can be set to either side. This pump features a 1/4″ air inlet, a 1″ NPTF (f) material inlet, and a 1″ NPTF (f) material outlet. It is recommended for piped installations of short to moderate length. The pump assembly weighs 18 lb.

    Product details

    • 4 ball design for efficient, high volume fluid delivery
    • Up to 20 gallons per minute free flow delivery
    • 1” fluid outlet, 1/4:” air inlet
    • Use for any light lubricant, both fresh and waste
    View all product information

    $930.60

    Quick View
  • 1:1 Transfer Pump

    $730.70
    #9916-A1
    View Product

    1:1 Transfer Pump

    #9916-A1

    Alemite 1:1 Ratio Pneumatic Ram Oil Pump. Suitable for high volume, low pressure transfer and dispense of light lubricants. Not recommended for feeding hose reels or oil bars, as maximum fluid pressure is 150 psi.

    Product details

    • Stub or universal length-Attached your desired length of 1.5” suction pipe
    • 1/2” fluid outlet, ¼” Air Inlet
    • 3” air motor, 1:1 ratio
    • 16 gallons per minute, maximum free flow delivery
    • Integral bung adapter
    • 17 lbs
    View all product information

    $730.70

    Quick View
  • 1:1 Transfer Pump

    $500.06
    #9916-A1
    View Product

    1:1 Transfer Pump

    #9916-A1

    stationary RAM stub pump includes integral bung adapter, 16 gal deliv

    Product details

    • Stub or universal length-Attached your desired length of 1.5” suction pipe
    • 1/2” fluid outlet, ¼” Air Inlet
    • 3” air motor, 1:1 ratio
    • 16 gallons per minute, maximum free flow delivery
    • Integral bung adapter
    • 17 lbs
    View all product information

    $500.06

    Quick View
  • 1:1 Universal Pump

    $622.35
    #222-051
    View Product

    1:1 Universal Pump

    #222-051

    Graco 1:1 ratio “Fast-Ball” universal length oil pump.

    Product details

    • Universal length-attach any length 1.5” suction tube to accommodate your tank or container size
    • ¼” air inlet, ¾” fluid outlet
    • Up to 5 gpm-use for transfer or dispense
    • Works with all light viscosity lubricants
    View all product information

    $622.35

    Quick View
  • 20′ x 3/4″ DEF Hose

    $254.10
    #343123-4
    View Product

    20′ x 3/4″ DEF Hose

    #343123-4

    Alemite DEF specific hose.

    Product details

    • ¾” x 20’
    • Wetted tube is Sulfur free EPDM rubber
    • Outer reinforced synthetic fiber with EPDM cover
    View all product information

    $254.10

    Quick View
  • 3′ x 3/4″ DEF Hose

    $805.70
    #343123-1
    View Product

    3′ x 3/4″ DEF Hose

    #343123-1

    Alemite DEF specific hose.

    Product details

    • ¾” x 3’
    • Wetted tube is Sulfur free EPDM rubber
    • Outer reinforced synthetic fiber with EPDM cover
    View all product information

    $805.70

    Quick View
  • 300 gallon SW pump/Tank Package

    $3,199.20
    #1300U-50E
    View Product

    300 gallon SW pump/Tank Package

    #1300U-50E

    Alemite Tank/Pump package. Includes 300 gallon single wall tank and complete bulk fluid dispense system. Assemble it, hook it to air, and you’re ready to pump oil.

    Product details

    • 300 gallon, vertical, single wall, U/L 142 steel tank
    • Tank includes sight gauge and all necessary fittings
    • Bulk fluid dispense system includes 5:1 ratio pneumatic Ram pump, down tube, 50’ oil reel with inlet hose and swivel, electronic metered dispense valve with flexible nozzle and automatic non-drip tip, air filter/regulator
    • 300 gallon vertical tank with compact foot print 50.3” long x 24.3” deep x 64.4” high
    • U/L 142 single wall tank
    View all product information

    $3,199.20

    Quick View
  • 3: 1 Pump Package

    $600.60
    #24G-579
    View Product

    3: 1 Pump Package

    #24G-579

    Graco 3:1 ratio LD oil pump with bung adapter and cut-to-length down tube.

    Product details

    • Down tube will accommodate any container 44” tall or less-cut to length for shorter than 44”
    • Built in thermal relief protects your system from thermal expansion
    • 450 psi max fluid pressure at pump outlet-use this pump to supply one or two dispense points, depending on distances
    • ¼” air inlet, ½” fluid outlet
    • 5-year limited warranty on non-wear parts
    View all product information

    $600.60

    Quick View
  • 3: 1 Universal Pump-mini Fireball

    $805
    #246-775
    View Product

    3: 1 Universal Pump-mini Fireball

    #246-775

    Graco “Mini-Fireball” 3:1 ratio universal length oil pump.

    Product details

    • 2.25” diameter Fireball air motor (less volume and pressure than standard Fireball)
    • Use for 1 to 3 dispense point, depending on distances
    • 3/8” air inlet, ½” fluid outlet
    • Universal length-attach appropriately long down tube to accommodate your tank or container
    • Just less than 2 gpm under normal usage conditions (at pump outlet)
    • 540 psi max fluid pressure at pump outlet
    View all product information

    $805

    Quick View