Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
-
“Z” swivel-1/2″ -27 x 1/4″ NPT
$86.60#81387View Product“Z” swivel-1/2″ -27 x 1/4″ NPT
#81387Lincoln Universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
Product details
- 1/2”-27 male x ¼” NPT Male threads
- 7500 psi maximum working pressure
- Works with Lincoln 740 Grease Gun
$86.60
Quick View -
“Z” swivel-1/2″ NPT x 3/8″ NPT
$167.26#81729View Product“Z” swivel-1/2″ NPT x 3/8″ NPT
#81729Lincoln High volume, universal, high pressure, 4 axis Z swivel for use with grease guns installed on the end of a hose or hose reel. Makes grease gun much more maneuverable.
Product details
- ½” NPT male x 3/8” NPT Male threads
- 7500 psi working pressure
- Works with Lincoln 3050 Grease Gun
$167.26
Quick View -
10′ x 3/4″ DEF Hose
$77.10#343123-3View Product10′ x 3/4″ DEF Hose
#343123-3Alemite DEF specific hose.
Product details
- ¾” x 10’
- Wetted tube is Sulfur free EPDM rubber
- Outer reinforced synthetic fiber with EPDM cover
$77.10
Quick View -
10:1 Ram Stub Pump
$1,332.95#9970View Product10:1 Ram Stub Pump
#9970Alemite 10:1 Ratio Pneumatic Ram Oil Pump. Universal or Stub length, so it can be used in any sized container. If suction tube will be longer than 60” use 321206 low level cut off/check valve to avoid loss of prime. The 10:1 ratio provides double the fluid pressure of the 5:1 ratio pumps, but half the volume at the same pump speed, so it will push light lubricants up to 300’ with through 1” I.D. pipe or tubing. Call us for proper application.
Product details
- Universal or Stub Length-Attach the suction tube of your choice
- 3/8” Material outlet, ¼” air inlet
- 3” Air Motor, 10:1 Ratio
- 1500 psi maximum fluid outlet pressure
- 3.5 gallons per minute, maximum free flow
- Includes 326750-E1 Bung Adapter
- 14 lbs
$1,332.95
Quick View -
12:1 Lincoln PowerMaster III Heavy duty, high pressure oil pump for 55 gallon drum
$3,395.20#2001View Product12:1 Lincoln PowerMaster III Heavy duty, high pressure oil pump for 55 gallon drum
#2001Lincoln’s Famous PowerMaster III 12:1 ratio oil pump for use in 55-gallon drums.
Product details
- Lincoln’s bullet proof PowerMaster III air motor design in 4.25” for high volume, reliable delivery
- 12:1 ratio provides extra pressure for very large shops or multiple simultaneous dispense
- This pump is a beast, and should be order for the busiest, highest volume shops
- 12.3 gpm free flow
- ½” air inlet, ¾” fluid outlet
- Includes 55-gallon drum length pump and air couplers
$3,395.20
Quick View -
12:1 Lincoln Powermaster III High Volume grease transfer pump-universal
$3,071.10#2028View Product12:1 Lincoln Powermaster III High Volume grease transfer pump-universal
#2028Product details
- Lincoln’s bullet proof PowerMaster III air motor design in 4.25” for high volume, reliable delivery
- Priming piston design, and 12:1 ratio works efficiently for extremely high volume grease transfer-12:1 ratio is used for grease transfer, not dispense
- 3.5 gpm maximum free flow of grease, 2400 psi maximum grease outlet pressure
- ½” air inlet, ¾” grease outlet
- Excellent for oil jobbers to transfer bulk grease into salable containers
$3,071.10
Quick View -
1:1 Lincoln Transfer pump with spout and air regulator-55 gallon drum size
$1,126.80#82230View Product1:1 Lincoln Transfer pump with spout and air regulator-55 gallon drum size
#82230Lincoln 1:1 ratio Pneumatic fluid transfer pump for use in 55 gallon drums.
Product details
- Works with all light fluids compatible with carbon steel and Buna wetted parts (call us if you are in doubt)
- High volume, low pressure transfer (up to 20 gpm) directly out of 55 gallon drums
- Includes integral spout that can be connected to fluid hose and built in air control. Also includes bung adapter to mount pump in 2” drum or tank bung
$1,126.80
Quick View -
1:1 Lincoln value series transfer pump for oil
$429.30#4480View Product1:1 Lincoln value series transfer pump for oil
#4480Lincoln low volume, low cost transfer pump for light lubricants.
Product details
- Features Lincoln’s series 4491 3.5:1 ratio, horizontal, valved piston pneumatic pump (6 gpm free flow)
- Includes integral delivery spout and shut off valve
$429.30
Quick View -
1:1 Pump Package
$1,608.55#239-702View Product1:1 Pump Package
#239-702Graco 1:1 ratio “Fast-Ball” oil pump with metered dispense kit and air regulator.
Product details
- Fits in the 2” bung and is sized for a 55-gallon drum
- Includes electronic in-line meter and spring loaded dispense spigot
- Up to 5 gallons per minute if you need it-most users set it at a max of 1 gpm
- ¼” air inlet, ¾” fluid outlet
- Excellent, economical dispense solution for lower use lube products (lube oils, synthetics, atf, hydraulic)
$1,608.55
Quick View -
1:1 Ram Fluid Evac
$930.60#9920View Product1:1 Ram Fluid Evac
#9920Alemite 9920 Pneumatic fluid evacuation/transfer pump consists of an air-operated motor and a four-ball check valve pump. The four-ball design allows the pump to deliver fluid on both strokes of the piston. This low-pressure pump (1:1 ratio) is designed to transfer all petroleum-based fluids, including waste oil, automatic transmission fluid, diesel fuel, and kerosene at a delivery rate of 20 gallons per minute. The pump is equipped with a bracket for mounting to walls or directly onto bulk tanks. It operates mounted in any direction. The fluid inlet and outlet can be set to either side. This pump features a 1/4″ air inlet, a 1″ NPTF (f) material inlet, and a 1″ NPTF (f) material outlet. It is recommended for piped installations of short to moderate length. The pump assembly weighs 18 lb.
Product details
- 4 ball design for efficient, high volume fluid delivery
- Up to 20 gallons per minute free flow delivery
- 1” fluid outlet, 1/4:” air inlet
- Use for any light lubricant, both fresh and waste
$930.60
Quick View -
1:1 Transfer Pump
$730.70#9916-A1View Product1:1 Transfer Pump
#9916-A1Alemite 1:1 Ratio Pneumatic Ram Oil Pump. Suitable for high volume, low pressure transfer and dispense of light lubricants. Not recommended for feeding hose reels or oil bars, as maximum fluid pressure is 150 psi.
Product details
- Stub or universal length-Attached your desired length of 1.5” suction pipe
- 1/2” fluid outlet, ¼” Air Inlet
- 3” air motor, 1:1 ratio
- 16 gallons per minute, maximum free flow delivery
- Integral bung adapter
- 17 lbs
$730.70
Quick View -
1:1 Transfer Pump
$500.06#9916-A1View Product1:1 Transfer Pump
#9916-A1stationary RAM stub pump includes integral bung adapter, 16 gal deliv
Product details
- Stub or universal length-Attached your desired length of 1.5” suction pipe
- 1/2” fluid outlet, ¼” Air Inlet
- 3” air motor, 1:1 ratio
- 16 gallons per minute, maximum free flow delivery
- Integral bung adapter
- 17 lbs
$500.06
Quick View -
1:1 Universal Pump
$622.35#222-051View Product1:1 Universal Pump
#222-051Graco 1:1 ratio “Fast-Ball” universal length oil pump.
Product details
- Universal length-attach any length 1.5” suction tube to accommodate your tank or container size
- ¼” air inlet, ¾” fluid outlet
- Up to 5 gpm-use for transfer or dispense
- Works with all light viscosity lubricants
$622.35
Quick View -
20′ x 3/4″ DEF Hose
$254.10#343123-4View Product20′ x 3/4″ DEF Hose
#343123-4Alemite DEF specific hose.
Product details
- ¾” x 20’
- Wetted tube is Sulfur free EPDM rubber
- Outer reinforced synthetic fiber with EPDM cover
$254.10
Quick View -
3′ x 3/4″ DEF Hose
$805.70#343123-1View Product3′ x 3/4″ DEF Hose
#343123-1Alemite DEF specific hose.
Product details
- ¾” x 3’
- Wetted tube is Sulfur free EPDM rubber
- Outer reinforced synthetic fiber with EPDM cover
$805.70
Quick View -
300 gallon SW pump/Tank Package
$3,199.20#1300U-50EView Product300 gallon SW pump/Tank Package
#1300U-50EAlemite Tank/Pump package. Includes 300 gallon single wall tank and complete bulk fluid dispense system. Assemble it, hook it to air, and you’re ready to pump oil.
Product details
- 300 gallon, vertical, single wall, U/L 142 steel tank
- Tank includes sight gauge and all necessary fittings
- Bulk fluid dispense system includes 5:1 ratio pneumatic Ram pump, down tube, 50’ oil reel with inlet hose and swivel, electronic metered dispense valve with flexible nozzle and automatic non-drip tip, air filter/regulator
- 300 gallon vertical tank with compact foot print 50.3” long x 24.3” deep x 64.4” high
- U/L 142 single wall tank
$3,199.20
Quick View -
3: 1 Pump Package
$600.60#24G-579View Product3: 1 Pump Package
#24G-579Graco 3:1 ratio LD oil pump with bung adapter and cut-to-length down tube.
Product details
- Down tube will accommodate any container 44” tall or less-cut to length for shorter than 44”
- Built in thermal relief protects your system from thermal expansion
- 450 psi max fluid pressure at pump outlet-use this pump to supply one or two dispense points, depending on distances
- ¼” air inlet, ½” fluid outlet
- 5-year limited warranty on non-wear parts
$600.60
Quick View -
3: 1 Universal Pump-mini Fireball
$805#246-775View Product3: 1 Universal Pump-mini Fireball
#246-775Graco “Mini-Fireball” 3:1 ratio universal length oil pump.
Product details
- 2.25” diameter Fireball air motor (less volume and pressure than standard Fireball)
- Use for 1 to 3 dispense point, depending on distances
- 3/8” air inlet, ½” fluid outlet
- Universal length-attach appropriately long down tube to accommodate your tank or container
- Just less than 2 gpm under normal usage conditions (at pump outlet)
- 540 psi max fluid pressure at pump outlet
$805
Quick View